Breezaire WKL 8000 Wine Cellar Cooling Unit

Optimize Large Wine Cellars with the BREEZAIRE WKL 8000 Cooling Unit

The BREEZAIRE WKL 8000 Cooling Unit is designed to maintain wine cellars as large as 2000 cubic feet at the perfect temperature consistently. This unit features an easy-to-read LED display and digital temperature controls via its advanced Sentry III+ system, which also protects against power failures and blocked airflow.

Aimed at satisfying the stringent requirements of wine connoisseurs, the WKL 8000 unit offers a level of functionality commonly found in higher-end models from other brands. With a BREEZAIRE system, you can be assured your wine cellar will provide the ideal environment for aging your wines.

Condensation Management: Like all WKL models, this unit includes a drain tube at its cold side base. Optionally, a Rear Drain Fitting (RDF) can be installed at the back. To remove condensate, simply connect a ½-inch I.D. vinyl hose to the fitting and direct it to an approved drain. Make sure to install an air break within 2 to 10 inches from the unit connection. If the hose has to ascend or run a significant horizontal distance, a condensate pump is required. This fitting is found on the lower left-hand rear side of the unit.

Note: BREEZAIRE cooling units are engineered to maintain environments sensitive to temperature and humidity fluctuations and are not suitable for standard refrigeration. For specialized recommendations and help in setting up the ideal wine storage space, consult your authorized dealer.

Features

• All WKL model have a drain tube located in the base of the unit on the cold side
• Come with the electric cord out the front
• The WKL 8000 models are shipped from the factory with the unit configured with the cold air routed out the front

WKL Series Wine Cellar Cooling Unit Sentry III+ Control System Features

• Large, easy to read, cool green display.
• Accurate, easy to adjust temperature set points with continuous display of cabinet temperature. 
• Power outage protection
• Blocked airflow protection, which shuts down unit and protects wine in case of high temperatures caused by condenser blockage or fan failure.
• Controls temperature by enclosure (cellar) air sensors or optional bottle probe.  
• Units are shipped from the factory fully charged and ready for use when mounted in a wall and connected to 115 AC volt source.

Specifications

• Model: WKL 8000
• Volume (max): 2000 cu.ft
• Electrical: 10 Amps 
• dBA: 69
  

Dimensions (in): 16.25W x 22.00H x 22.25D 
Weight: 101 lb. 

WKL Series Cellar Cooling Units Modifications & Upgrades

WKL Series Cellar Cooling Unites Installation Instructions